Adding or Replacing a Gate Remote

Whether you need a remote for a new driver in the house, or you've lost one down the back of the sofa (or worse, it's been stolen), here's how it works.

Step 1: Get the right remote

Remotes aren't universal. You need one that matches your gate's receiver – usually the same make as the motor or the receiver unit. To find out what you've got:

• look on the back of an existing remote for a brand and model
• look for a label on the motor or the control box (from the outside – don't open it)
• or send me photos and I'll identify it

Step 2: Code it to the gate

Every new remote has to be "learned" by the receiver before it works. How that's done depends on the system:

• Some systems let you add a new remote using a remote that already works, standing near the gate. The manual for your system will explain the sequence – it's usually a combination of button presses.
• Most systems need a button pressed on the receiver or control board itself. The control board runs on mains electricity and is part of the gate's safety system, so that's a job for an engineer.

If you have the manual and your system supports adding remotes from an existing one, give it a go. If not, I can code new remotes on a visit, often while doing a service.

Lost or stolen remotes

A lost remote is a security risk – whoever finds it can open your gate. Get it removed from the system:

• some receivers can delete one remote individually
• others need the memory cleared and the remaining remotes re-added

I can do this for you and code in replacements at the same time.

Tips

• Keep a note of the make and model of your remotes and receiver.
• Keep a spare remote somewhere safe, away from the car.
• If you hand remotes to tradespeople or carers, consider a keypad code or app access instead – it's easier to cancel.

Need a new remote?

Call, text or WhatsApp Adrian on 07855 781433. Send a photo of your remote and motor and I'll make sure I bring the right one.

Questions people ask me